VapiCon 2025 Hardware Workshop Demo Video Prerequisites ESP-IDF: Install ESP-IDF v5.5.1 or later Quick Installation Steps macOS/Linux # Install prerequisites (macOS) brew install cmake ninja dfu-util # Install prerequisites (Ubuntu/Debian) # sudo apt-get install git wget flex bison gperf python3 python3-venv cmake ninja-build ccache libffi-dev libssl-dev dfu-util libusb-1.0-0 # Clone ESP-IDF repository mkdir -p ~ /esp cd ~ /esp git clone -b v5.5.1 --recursive https://github.com/espressif/esp-idf.git # Install ESP-IDF tools cd ~ /esp/esp-idf ./install.sh esp32s3 # Set up environment (run this each time you open a new terminal) source ~ /esp/esp-idf/export.sh Windows # Download and run the ESP-IDF installer from: # https://dl.espressif.com/dl/esp-idf/ # Or use the ESP-IDF command prompt installed by the installer # Then run: export.bat Verify Installation idf.py --version # Should output something like: ESP-IDF v5.5.1 Setting up Environment (Required for each terminal session) # Add this to your ~/.zshrc to avoid running it manually: alias get_idf= ' . ~/esp/esp-idf/export.sh ' # Open a new terminal to apply the changes # Then you can simply run: get_idf Full Documentation: Official ESP-IDF Installation Guide Hardware: AtomS3R or Atomic Echo Base Atomic Battery Base Project Setup 1. Clone the Repository git clone --recurse-submodules https://github.com/VapiAI/vapicon-2025-hardware-workshop.git cd vapicon-2025-hardware-workshop 2. Configuration Run the configuration menu to set up your WiFi credentials and Bearer Token: idf.py menuconfig Navigate to: VapiCon 2025 Hardware Workshop Configuration Set your WiFi Name and WiFi Password and Set your Bearer Token Press S to save and Q to quit. Config values BEARER_TOKEN - b3db41dc-f62e-4ca8-89dc-550eab564212 Building the Project Build the firmware idf.py build Flashing to Device Flash and monitor idf.py flash monitor This command will: Flash the firmware to your connected ESP32-S3 device Open the serial monitor to view debug ...
First seen: 2025-10-09 22:21
Last seen: 2025-10-19 23:02