A new prototype is laying claim to the title of smallest, lightest untethered flying robot.At less than a centimeter in wingspan, the wirelessly powered robot is currently very limited in how far it can travel away from the magnetic fields that drive its flight. However, the scientists who developed it suggest there are ways to boost its range, which could lead to potential applications such as search and rescue operations, inspecting damaged machinery in industrial settings, and even plant pollination.One strategy to shrink flying robots involves removing their batteries and supplying them electricity using tethers. However, tethered flying robots face problems operating freely in complex environments. This has led some researchers to explore wireless methods of powering robot flight.“The dream was to make flying robots to fly anywhere and anytime without using an electrical wire for the power source,” says Liwei Lin, a professor of mechanical engineering at University of California at Berkeley. Lin and his fellow researchers detailed their findings in Science Advances.Each flying robot has a 3D-printed body that consists of a propeller with four blades. This rotor is encircled by a ring that helps the robot stay balanced during flight. On top of each body are two tiny permanent magnets. All in all, the insect-scale prototypes have wingspans as small as 9.4 millimeters and weigh as little as 21 milligrams. Previously, the smallest reported flying robot, either tethered or untethered, was 28 millimeters wide.When exposed to an external alternating magnetic field, the robots spin and fly without tethers. The lowest magnetic field strength needed to maintain flight is 3.1 millitesla. (In comparison, a refrigerator magnet has a strength of about 10 mT.)When the applied magnetic field alternates with a frequency of 310 hertz, the robots can hover. At 340 Hz, they accelerate upward. The researchers could steer the robots laterally by adjusting the applied magnetic fields...
First seen: 2025-03-31 13:42
Last seen: 2025-03-31 14:42